NSUF 21-4272: The Role of Precipitate Coherency on Helium Trapping in Additively Manufactured Alloy 718
The challenges for structural materials for high temperature advanced reactors are irradiation effects, corrosion, and elevated-temperature strength in the temperature range of 500-700°C where high temperature helium embrittlement limits component lifetime. Ni-based superalloys are a primary candidate alloy class for advanced reactor applications because of their intrinsic resistance to creep, adequate corrosion resistance and the ability to tailor the microstructure for high strength. These high strength Ni-based alloys gain their strength primarily through solid solution strengthening and/or secondary precipitating phases in the lattice, such as the intermetallic phases δ, γʹ or γʹʹ or a carbide phase. The poor machinability and extensive work hardening of Ni-based superalloys makes additive or advanced manufacturing (AM) an attractive option for producing geometrically complex components with distinct microstructures while reducing the overall cost and shortening the supply chain. The absorption of transmutation produced helium at grain boundaries becomes a key factor in the propagation of cracks, possibly leading to subcritical crack growth by cavity coalescence. The dislocation-lattice and precipitate-lattice interfaces can act as benign locations in the microstructure to trap helium, reducing the detrimental accumulation of helium at the grain boundaries. In candidate Ni-based superalloys, helium trapping at interfaces will play a large role in the embrittlement response and thus the long-term service life of in-core components. We propose to investigate the effect of precipitate-lattice coherency on helium trapping using in-situ dual ion irradiation and annealing within a transmission electron microscope at high temperatures from 500-700°C. We will investigate the hypothesis that the larger free volume associated with incoherent precipitate-lattice will act as a greater sink for helium compared to coherent precipitates, and thus reduce cavity formation on grain boundaries at high temperature. The samples in this work were manufactured in the MDF using the laser powder bed fusion (LBPF) Concept Laser X-Line AM system and heat treated to produce compositionally identical Ni3Nb precipitates as either the incoherent orthorhombic δ phase or the coherent body centered tetragonal γ″ phase. The proposing team seeks use, through the Nuclear Science User Facilities, of the Michigan Ion Beam Laboratory (MIBL) for in-situ TEM ion irradiation with characterization and the Low Activation Materials Development and Analysis (LAMDA) facility at ORNL for liftout preparation and detailed post irradiation electron microscopy. The outcomes of this work will provide quantitative analysis of helium-induced cavity formation on grain boundaries and precipitates as a function of temperature. Completion of the proposed study will provide several outcomes: the effect of precipitate coherency on helium trapping and the relative partitioning of helium among precipitates and grain boundaries. This knowledge is critical to understanding how the precipitate microstructure of an alloy can be tailored to mitigate high temperature helium embrittlement for advanced nuclear technologies.
Additional Info
| Field | Value |
|---|---|
| Awarded Institution | Oak Ridge National Laboratory |
| Embargo End Date | 2023-03-07 |
| Facility Tech Lead | Kevin Field, Kory Linton |
| Irradiation Facilities | Michigan Ion Beam Laboratory |
| NSUF Call | FY 2021 RTE 1st Call |
| PI | Stephen Taller |
| PIE Facilities | Low Activation Materials Design and Analysis Laboratory |
| Project Member | Dr. Stephen Taller, R&D Staff Scientist - Oak Ridge National Laboratory (https://orcid.org/0000-0002-7323-4786) |
| Project Notes | Awarded on 06/07/2021 |
| Project Type | RTE |
| Publication | Precipitate and Cavity Evolution in Alloy 718 Under High Temperature In-situ Ion Irradiation using Machine Learning Stephen Taller TMS Annual Meeting and Exhibition 2023 2023-03-19 - 2023-03-23 |
| Publication | Microstructural Evolution of Alloy 718 Under High Temperature In-situ Ion Irradiation with Machine Learning Stephen Taller Materials Science and Technology 2022 2022-10-09 - 2022-10-12 |
| Publication | Microstructural Evolution of Alloy 718 Under High Temperature In-situ Ion Irradiation Stephen Taller Sixth International Workshop on Structural Materials for Innovative Nuclear Systems (SMINS-6) 2022-09-12 - 2022-09-15 |
| Publication | Improving the Nuclear Materials Development Cycle with High Throughput Microscopy and Machine Learning Stephen Taller Deep Learning for Microscopy Image Analysis in Materials Science: Advancing Research and Education Workshop 2023-06-05 - 2023-06-06 |
| RTE Number | 4272 |